Skip to content
Notch
← Back to the plan

Rustic Industrial TV Stand — board plan

What to buy, and which parts come off which board.

Buy 16 boards at 8 ft.

3/4" × 9"

3 boards · 13.4 board feet (includes 15% for knots and defects) · 88% of each board consumed

  1. Board 1 · 11 3/4" left over

    1. Horizontal Shelf Plywood — 70"
    2. Large Vertical Divider Plywood — 13"

  2. Board 2 · 11 3/4" left over

    1. Horizontal Shelf Plywood — 70"
    2. Large Vertical Divider Plywood — 13"

  3. Board 3 · 11 3/4" left over

    1. Horizontal Shelf Plywood — 70"
    2. Large Vertical Divider Plywood — 13"

3/4" × 7"

1 board · 0.8 board feet (includes 15% for knots and defects) · 20% of each board consumed

  1. Board 1 · 76 3/4" left over

    1. Small Vertical Divider Plywood — 9"
    2. Small Vertical Divider Plywood — 9"

3/4" × 5"

2 boards · 3.0 board feet (includes 15% for knots and defects) · 54% of each board consumed

  1. Board 1 · 5 1/8" left over

    1. Drawer Box Front/Back — 14"
    2. Drawer Box Front/Back — 14"
    3. Drawer Box Front/Back — 14"
    4. Drawer Box Front/Back — 14"
    5. Drawer Box Sides — 11"
    6. Drawer Box Sides — 11"
    7. Drawer Box Sides — 11"

  2. Board 2 · 83 7/8" left over

    1. Drawer Box Sides — 11"

3/4" × 2"

7 boards · 7.3 board feet (includes 15% for knots and defects) · 92% of each board consumed

  1. Board 1 · 4 3/4" left over

    1. Horizontal Shelf Boards — 70"
    2. Inner Side Boards — 20"

  2. Board 2 · 4 3/4" left over

    1. Horizontal Shelf Boards — 70"
    2. Inner Side Boards — 20"

  3. Board 3 · 4 3/4" left over

    1. Horizontal Shelf Boards — 70"
    2. Inner Side Boards — 20"

  4. Board 4 · 3 1/2" left over

    1. Outer Side Boards — 25"
    2. Outer Side Boards — 25"
    3. Outer Side Boards — 25"
    4. Drawer Front Boards — 16"

  5. Board 5 · 2 3/8" left over

    1. Outer Side Boards — 25"
    2. Inner Side Boards — 20"
    3. Inner Side Boards — 20"
    4. Inner Side Boards — 20"
    5. Top/Bottom Side Boards — 7"

  6. Board 6 · 1 1/4" left over

    1. Drawer Front Boards — 16"
    2. Drawer Front Boards — 16"
    3. Drawer Front Boards — 16"
    4. Drawer Front Boards — 16"
    5. Drawer Front Boards — 16"
    6. Large Vertical Divider Boards — 13"

  7. Board 7 · 33 1/8" left over

    1. Large Vertical Divider Boards — 13"
    2. Large Vertical Divider Boards — 13"
    3. Top/Bottom Side Boards — 7"
    4. Top/Bottom Side Boards — 7"
    5. Top/Bottom Side Boards — 7"
    6. Small Vertical Divider Boards — 7"
    7. Small Vertical Divider Boards — 7"

3/4" × 1"

1 board · 0.5 board feet (includes 15% for knots and defects) · 85% of each board consumed

  1. Board 1 · 14 5/8" left over

    1. Toekick — 34"
    2. Toekick — 34"
    3. Toekick Center — 12"

1/4" × 23"

1 board · 3.2 board feet (includes 15% for knots and defects) · 74% of each board consumed

  1. Board 1 · 24 7/8" left over

    1. Back — 70"

1/4" × 10"

1 board · 0.6 board feet (includes 15% for knots and defects) · 33% of each board consumed

  1. Board 1 · 64 3/4" left over

    1. Drawer Box Bottoms — 15"
    2. Drawer Box Bottoms — 15"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.