Pretend Play Coffee Station with Espresso Machine — board plan

What to buy, and which parts come off which board.

Buy 9 boards at 8 ft.

2" × 2" — 2" dowel

1 board · 0.5 board feet (includes 15% for knots and defects) · 17% of the boards you buy used

Board 1 · 79 5/8" left over
3"3"3"3"1 1/2"1/2"1/2"
1. Cart legs — 3"
2. Cart legs — 3"
3. Cart legs — 3"
4. Cart legs — 3"
5. Portafilter holder — 1 1/2"
6. Knobs — 1/2"
7. Knobs — 1/2"

3/4" × 11 1/4" — 1x12

2 boards · 7.9 board feet (includes 15% for knots and defects) · 62% of the boards you buy used

Board 1 · 12 5/8" left over
32 1/2"25 1/2"24"
1. Cart top — 32 1/2"
2. Cart bottom — 25 1/2"
3. Cart center panel — 24"
Board 2 · 59 3/4" left over
17 1/2"17 1/2"
1. Cart sides — 17 1/2"
2. Cart sides — 17 1/2"

3/4" × 9 1/4" — 1x10

1 board · 1.3 board feet (includes 15% for knots and defects) · 26% of the boards you buy used

Board 1 · 70 7/8" left over
24"
1. Cart shelf — 24"

3/4" × 7 1/4" — 1x8

1 board · 1.9 board feet (includes 15% for knots and defects) · 46% of the boards you buy used

Board 1 · 51 1/2" left over
12"12"9 1/2"9 1/2"
1. Espresso machine front/back — 12"
2. Espresso machine front/back — 12"
3. Espresso machine sides — 9 1/2"
4. Espresso machine sides — 9 1/2"

3/4" × 3 1/2" — 1x4

1 board · 0.3 board feet (includes 15% for knots and defects) · 14% of the boards you buy used

Board 1 · 82 7/8" left over
12"
1. Espresso machine panel — 12"

3/4" × 2 1/2" — 1x3

1 board · 0.2 board feet (includes 15% for knots and defects) · 14% of the boards you buy used

Board 1 · 82 7/8" left over
12"
1. Espresso machine drip tray — 12"

3/4" × 1 1/2" — 1x2

1 board · 0.4 board feet (includes 15% for knots and defects) · 43% of the boards you buy used

Board 1 · 54 3/4" left over
26 1/2"13 1/2"
1. Cart top support — 26 1/2"
2. Espresso machine top — 13 1/2"

3/4" × 3/4" — 3/4" dowel

1 board · 0.0 board feet (includes 15% for knots and defects) · 13% of the boards you buy used

Board 1 · 83 3/4" left over
6"5"
1. Steam wand — 6"
2. Portafilter handle — 5"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

2" × 2" — 2" dowel

Board 1 · 79 5/8" left over

3/4" × 11 1/4" — 1x12

Board 1 · 12 5/8" left over

Board 2 · 59 3/4" left over

3/4" × 9 1/4" — 1x10

Board 1 · 70 7/8" left over

3/4" × 7 1/4" — 1x8

Board 1 · 51 1/2" left over

3/4" × 3 1/2" — 1x4

Board 1 · 82 7/8" left over

3/4" × 2 1/2" — 1x3

Board 1 · 82 7/8" left over

3/4" × 1 1/2" — 1x2

Board 1 · 54 3/4" left over

3/4" × 3/4" — 3/4" dowel

Board 1 · 83 3/4" left over