Outdoor Sectional Ottoman / Accent Table

Attach the seat frame boards together with 2-1/2" exterior screws, two per joint, to form the rectangular frame. Keep it square.

Attach the legs from inside the seat frame into the back of each leg, two screws per joint. Drive the screws at a slight angle — that little angle pulls the joint tight and prevents wobble.

Lay out the six tabletop slats, spacing them evenly with small gaps for drainage, and screw them down. Mark the screw locations first for a neater finished look.

Attach the 2x2 trim to the ends of the tabletop slats and across the tops of the legs to tie the top together and finish the edges.