Nightstand With Drawers

Build 4 panels for the nightstand frame by joining three 1x5 boards each using 1-1/4"pocket hole screws and wood glue. You will have two panels that are 16" tall and two panels that are 14 7/8" tall.

Build the box for the nightstand frame by joining the four panels using 1-1/4"pocket hole screws and wood glue. The pocket holes are on both ends of the 14 7/8" panels. Using corner clamps makes it easy to ensure that the box is square.

Attach the angled apron between two legs using 2-1/2" pocket holes screws and wood glue. Build two of these.

Attach both the straight aprons to one of the leg frames built in the above step using 2-1/2" pocket hole screws and wood glue.

Attach the second leg frame using 2-1/2" pocket hole screws and wood glue to get get the final leg frame for the nightstand.

• Align the nightstand box on the frame. The front legs are aligned with the front of the box. There is 1" spacing from each side.
• Attach using 1-1/4" wood screws all around from the inside of the nightstand frame.

Build two drawers using the 1x6 boards and install drawer slides inside the nightstand frame. Attach the 1x8 drawer frames and your choice of hardware.

For more details on this project, please see - https://www.anikasdiylife.com/diy-nightstand-with-drawers/ For a full video of the build - https://youtu.be/LO3aQBazBiU