Skip to content
Notch
← Back to the plan

Mudroom Lockers – with CHARACTER! — board plan

What to buy, and which parts come off which board.

Buy 55 boards at 8 ft.

Some parts do not fit on an 8 ft board. Pick a longer board above, or plan to join them. They are listed with their groups below — they are not included in the board count.

7/8" × 5"

6 boards · 10.8 board feet (includes 15% for knots and defects) · 55% of each board consumed

  1. Board 1 · 41 7/8" left over

    1. (6/4 Red Oak, Bench Seat) Seat long [Glue Up Panel] note: glue up is oversized — 53"

  2. Board 2 · 41 7/8" left over

    1. (6/4 Red Oak, Bench Seat) Seat long [Glue Up Panel] note: glue up is oversized — 53"

  3. Board 3 · 41 7/8" left over

    1. (6/4 Red Oak, Bench Seat) Seat long [Glue Up Panel] note: glue up is oversized — 53"

  4. Board 4 · 44 7/8" left over

    1. (6/4 Red Oak, Bench Seat) Seat long [Glue Up Panel] note: glue up is oversized — 50"

  5. Board 5 · 44 7/8" left over

    1. (6/4 Red Oak, Bench Seat) Seat long [Glue Up Panel] note: glue up is oversized — 50"

  6. Board 6 · 44 7/8" left over

    1. (6/4 Red Oak, Bench Seat) Seat long [Glue Up Panel] note: glue up is oversized — 50"

7/8" × 3"

1 board · 0.3 board feet (includes 15% for knots and defects) · 17% of each board consumed

  1. Board 1 · 79 3/8" left over

    1. (4/4 Poplar, Top Trim) Cap Stone — 3"
    2. (4/4 Poplar, Top Trim) Cap Stone — 3"
    3. (4/4 Poplar, Top Trim) Cap Stone — 3"
    4. (4/4 Poplar, Top Trim) Cap Stone — 3"
    5. (4/4 Poplar, Top Trim) Cap Stone — 3"

3/4" × 13"

2 boards · 10.9 board feet (includes 15% for knots and defects) · 74% of each board consumed

  1. Board 1 · 14 1/2" left over

    1. (3/4 Ply, Bench Carcass) Sides — 20"
    2. (3/4 Ply, Bench Carcass) Sides — 20"
    3. (3/4 Ply, Bench Carcass) Sides — 20"
    4. (3/4 Ply, Bench Carcass) Sides — 20"

  2. Board 2 · 34 5/8" left over

    1. (3/4 Ply, Bench Carcass) Vertical Divider — 20"
    2. (3/4 Ply, Bench Carcass) Vertical Divider — 20"
    3. (3/4 Ply, Bench Carcass) Vertical Divider — 20"

3/4" × 12"

2 boards · 12.2 board feet (includes 15% for knots and defects) · 90% of each board consumed

  1. Board 1 · 9 3/8" left over

    1. (3/4 Ply, Bench Carcass) Shelves — 17"
    2. (3/4 Ply, Bench Carcass) Shelves — 17"
    3. (3/4 Ply, Bench Carcass) Shelves — 17"
    4. (3/4 Ply, Bench Carcass) Shelves — 17"
    5. (3/4 Ply, Bench Carcass) Shelves — 17"

  2. Board 2 · 9 3/8" left over

    1. (3/4 Ply, Bench Carcass) Shelves — 17"
    2. (3/4 Ply, Bench Carcass) Shelves — 17"
    3. (3/4 Ply, Bench Carcass) Shelves — 17"
    4. (3/4 Ply, Bench Carcass) Shelves Middle — 17"
    5. (3/4 Ply, Bench Carcass) Shelves Middle — 17"

3/4" × 10"

7 boards · 31.9 board feet (includes 15% for knots and defects) · 80% of each board consumed

  1. Board 1 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Side — 76"

  2. Board 2 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Side — 76"

  3. Board 3 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Side — 76"

  4. Board 4 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Side — 76"

  5. Board 5 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Vertical Divider — 76"

  6. Board 6 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Vertical Divider — 76"

  7. Board 7 · 18 7/8" left over

    1. (3/4 Ply, Top Carcass) Vertical Divider — 76"

3/4" × 9"

3 boards · 13.7 board feet (includes 15% for knots and defects) · 90% of each board consumed

  1. Board 1 · 9 3/8" left over

    1. (3/4 Ply, Top Carcass) Shelves — 17"
    2. (3/4 Ply, Top Carcass) Shelves — 17"
    3. (3/4 Ply, Top Carcass) Shelves — 17"
    4. (3/4 Ply, Top Carcass) Shelves — 17"
    5. (3/4 Ply, Top Carcass) Shelves — 17"

  2. Board 2 · 9 3/8" left over

    1. (3/4 Ply, Top Carcass) Shelves — 17"
    2. (3/4 Ply, Top Carcass) Shelves — 17"
    3. (3/4 Ply, Top Carcass) Shelves — 17"
    4. (3/4 Ply, Top Carcass) Shelves — 17"
    5. (3/4 Ply, Top Carcass) Shelves — 17"

  3. Board 3 · 9 3/8" left over

    1. (3/4 Ply, Top Carcass) Shelves — 17"
    2. (3/4 Ply, Top Carcass) Shelves — 17"
    3. (3/4 Ply, Top Carcass) Middle Shelves — 17"
    4. (3/4 Ply, Top Carcass) Middle Shelves — 17"
    5. (3/4 Ply, Top Carcass) Middle Shelves — 17"

3/4" × 5"

1 board · 2.3 board feet (includes 15% for knots and defects) · 80% of each board consumed

  1. Board 1 · 18 7/8" left over

    1. (4/4 Poplar, Top Face Frame) Adjoining Stile Wide — 76"

3/4" × 4"

1 board · 1.8 board feet (includes 15% for knots and defects) · 80% of each board consumed

  1. Board 1 · 18 7/8" left over

    1. (4/4 Poplar, Top Face Frame) Adjoining Stile Short — 76"

3/4" × 3"

4 boards · 5.2 board feet (includes 15% for knots and defects) · 76% of each board consumed

  1. Board 1 · 18 7/8" left over

    1. (4/4 Poplar, Top Face Frame) Center Stile — 76"

  2. Board 2 · 18 7/8" left over

    1. (4/4 Poplar, Top Face Frame) Center Stile — 76"

  3. Board 3 · 18 7/8" left over

    1. (4/4 Poplar, Top Face Frame) Center Stile — 76"

  4. Board 4 · 34 5/8" left over

    1. (4/4 Poplar, Bench Face Frame) Center Stile — 20"
    2. (4/4 Poplar, Bench Face Frame) Center Stile — 20"
    3. (4/4 Poplar, Bench Face Frame) Center Stile — 20"

3/4" × 2"

1 board · 1.1 board feet (includes 15% for knots and defects) · 96% of each board consumed

  1. Board 1 · 4 1/4" left over

    1. (4/4 Poplar, Bench Face Frame) Adjoining Stile — 20"
    2. (4/4 Poplar, Bench Face Frame) Lower Stile — 14"
    3. (4/4 Poplar, Bench Face Frame) Lower Stile — 14"
    4. (4/4 Poplar, Bench Face Frame) Lower Stile — 14"
    5. (4/4 Poplar, Bench Face Frame) Lower Stile — 14"
    6. (4/4 Poplar, Bench Face Frame) Lower Stile — 14"

3/4" × 1"

9 boards · 4.3 board feet (includes 15% for knots and defects) · 85% of each board consumed

  1. Board 1 · 3 3/4" left over

    1. (4/4 Poplar, Top Face Frame) Stile — 76"
    2. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"

  2. Board 2 · 3 3/4" left over

    1. (4/4 Poplar, Top Face Frame) Stile — 76"
    2. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"

  3. Board 3 · 4 3/8" left over

    1. (4/4 Poplar, Bench Face Frame) Stile — 20"
    2. (4/4 Poplar, Bench Face Frame) Stile — 20"
    3. (4/4 Poplar, Bench Face Frame) Stile — 20"
    4. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    5. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"

  4. Board 4 · 4 1/4" left over

    1. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    2. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    3. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    4. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    5. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    6. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"

  5. Board 5 · 5 1/4" left over

    1. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    2. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    3. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    4. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    5. (4/4 Poplar, Top Face Frame) Rail Arch [Glue Up Panel] note: glue up is oversized — 15"
    6. (4/4 Poplar, Bench Face Frame) Rail — 14"

  6. Board 6 · 10 1/4" left over

    1. (4/4 Poplar, Bench Face Frame) Rail — 14"
    2. (4/4 Poplar, Bench Face Frame) Rail — 14"
    3. (4/4 Poplar, Bench Face Frame) Rail — 14"
    4. (4/4 Poplar, Bench Face Frame) Rail — 14"
    5. (4/4 Poplar, Bench Face Frame) Rail — 14"
    6. (4/4 Poplar, Bench Face Frame) Rail — 14"

  7. Board 7 · 10 1/4" left over

    1. (4/4 Poplar, Bench Face Frame) Rail — 14"
    2. (4/4 Poplar, Bench Face Frame) Rail — 14"
    3. (4/4 Poplar, Bench Face Frame) Rail — 14"
    4. (4/4 Poplar, Top Face Frame) Rail — 14"
    5. (4/4 Poplar, Top Face Frame) Rail — 14"
    6. (4/4 Poplar, Top Face Frame) Rail — 14"

  8. Board 8 · 10 1/4" left over

    1. (4/4 Poplar, Top Face Frame) Rail — 14"
    2. (4/4 Poplar, Top Face Frame) Rail — 14"
    3. (4/4 Poplar, Top Face Frame) Rail — 14"
    4. (4/4 Poplar, Top Face Frame) Rail — 14"
    5. (4/4 Poplar, Top Face Frame) Rail — 14"
    6. (4/4 Poplar, Top Face Frame) Rail — 14"

  9. Board 9 · 80 7/8" left over

    1. (4/4 Poplar, Top Face Frame) Rail — 14"

11/16" × 3"

0 boards · 3.2 board feet (includes 15% for knots and defects) · 0% of each board consumed

  • Crown Moulding at 96" — Longer than a 96" board once the end trim is taken off.
  • Crown Moulding at 96" — Longer than a 96" board once the end trim is taken off.

    5/8" × 5"

    2 boards · 3.0 board feet (includes 15% for knots and defects) · 65% of each board consumed

    1. Board 1 · 8 1/8" left over

      1. (4/4 Poplar, Top Trim) Arch Full — 13"
      2. (4/4 Poplar, Top Trim) Arch Full — 13"
      3. (4/4 Poplar, Top Trim) Arch — 12"
      4. (4/4 Poplar, Top Trim) Arch — 12"
      5. (4/4 Poplar, Top Trim) Arch — 12"
      6. (4/4 Poplar, Top Trim) Arch — 12"
      7. (4/4 Poplar, Top Trim) Arch — 12"

    2. Board 2 · 58 5/8" left over

      1. (4/4 Poplar, Top Trim) Arch — 12"
      2. (4/4 Poplar, Top Trim) Arch — 12"
      3. (4/4 Poplar, Top Trim) Arch — 12"

    5/8" × 3"

    5 boards · 4.6 board feet (includes 15% for knots and defects) · 66% of each board consumed

    1. Board 1 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Column — 62"

    2. Board 2 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Column — 62"

    3. Board 3 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Column — 62"

    4. Board 4 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Column — 62"

    5. Board 5 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Column — 62"

    5/8" × 1"

    2 boards · 1.1 board feet (includes 15% for knots and defects) · 66% of each board consumed

    • (4/4 Poplar, Top Trim) Crown Moulding, Pillars at 96" — Longer than a 96" board once the end trim is taken off.

    1. Board 1 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Colum Thin — 62"

    2. Board 2 · 32 7/8" left over

      1. (4/4 Poplar, Top Trim) Colum Thin — 62"

    1/2" × 17"

    7 boards · 32.6 board feet (includes 15% for knots and defects) · 73% of each board consumed

    1. Board 1 · 18 7/8" left over

      1. (1/2 Ply, Top Carcass) Back — 76"

    2. Board 2 · 18 7/8" left over

      1. (1/2 Ply, Top Carcass) Back — 76"

    3. Board 3 · 18 7/8" left over

      1. (1/2 Ply, Top Carcass) Back — 76"

    4. Board 4 · 18 7/8" left over

      1. (1/2 Ply, Top Carcass) Back — 76"

    5. Board 5 · 18 7/8" left over

      1. (1/2 Ply, Top Carcass) Middle Back — 76"

    6. Board 6 · 14 1/2" left over

      1. (1/2 Ply, Bench Carcass) Back — 20"
      2. (1/2 Ply, Bench Carcass) Back — 20"
      3. (1/2 Ply, Bench Carcass) Back — 20"
      4. (1/2 Ply, Bench Carcass) Back — 20"

    7. Board 7 · 74 7/8" left over

      1. (1/2 Ply, Bench Carcass) Back Middle — 20"

    1/4" × 1"

    2 boards · 0.3 board feet (includes 15% for knots and defects) · 75% of each board consumed

    1. Board 1 · 10 1/4" left over

      1. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      2. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      3. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      4. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      5. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      6. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"

    2. Board 2 · 38 1/2" left over

      1. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      2. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      3. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"
      4. (4/4 Poplar, Top Trim) Shelf Bull Nose — 14"

    Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.