Skip to content
Notch

← Back to the plan

Gifts & Small Projects

Modular Plate Rack

Step-by-step build — 4 steps. Also available as a print sheet.

  1. 1Frame

    • Join both 25 1/2" and 24" 1x6" boards using wood glue and 2 inch, 16 gauge finishing nails. This will form a 25 1/2" square.
    • Insert remaining 24" 1x6" board so that the bottom of the board is 12" from the top of the unit.
    • Then secure using glue and 2" 16 gauge finishing nails.
    Modular Plate Rack — step photo 3

  2. 2Front Rails

    Attach the 25 1/2" 1x2" board(s) to the face of the unit using wood glue and 2 inch 16 gauge finishing nails.

    Modular Plate Rack — step photo 4

  3. 3Back Support

    Attach the remaining 24" 1x2"board using wood glue and 2 inch 16 gauge finishing nails. This is an ideal place to attach the unit to the wall, or you can attach hanging hardware to the back.

    Modular Plate Rack — step photo 5

  4. 4Finish

    Fill all nail holes with wood filler. Sand smooth, then apply desire stain and/or paint.