NotchLoading plan…
Loading plan…
This is a great build. This jewelry cabinet can really be used for anything, but it's especially perfect for use in a closet or bathroom. The cabinet shelves can be adjusted and built as you'd like. The cabinet has a mirror on the front, and is made of solid pine wood. It can be stained or painted.
| Item | Qty |
|---|---|
| Board, 1x4 72" | 5 board |
| Board, 1x6 72" | 1 board |
| Board, 1x3 96" | 2 board |
| Plywood, 1/4" Thick Quarter Sheet | 1 board |
| Hinges | 4 each |
| Knob or Door Handle | 1 each |
| Door Close Magnets | 1 each |
| 1" pocket hole screws | 50 each |
| Wood Glue | 1 each |
| Paint or Wood Stain | 1 each |
| Mirror- 24" x 30" | 1 each |
| Wood Filler (paintable or stainable) | 1 each |
| Screw Hooks | 10 each |
Overall cost: $$$. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.
| Part | Qty | T × W × L |
|---|---|---|
| Cabinet frame pieces | 2 | 3/4" × 3 1/2" × 37" |
| Cabinet frame Pieces + Cabinet door frame pieces | 4 | 3/4" × 3 1/2" × 2" |
| Cabinet door frame pieces | 2 | 3/4" × 3 1/2" × 31" |
| Cabinet supports | 2 | 3/4" × 5 1/2" × 2" |
| Shelves | 4 | 3/4" × 2 1/2" × 2" |
| Cabinet door backing | 1 | 1" × 27" × 33" |
Buy 5 boards at 8 ft.
1 board
1 board
2 boards
1 board
Assumes 8 ft stock, a 1/8" saw kerf, and buying each part at its own width. Change the board size or kerf on the full board plan →
Drill pocket holes in ends of 29.5" boards. Using 1" pocket hole screws and wood glue, Attach those boards to the 37" boards to create the cabinet frame.
You can build your shelves wherever you'd like. I placed mine above and below the 1x6", and then 13" down from the top, and 12 1/2" up from the bottom. Use 1" pocket hole screws and wood glue to attach shelves to the vertical supports of the cabinet frame.
Cut 2- 30" 1x4's and drill pocket holes on each end of both boards. Use 1" pocket hole screws and wood glue to attach them to your 31" 1x4's. This frame will be your cabinet door frame.
cut a piece of 1/4" plywood 27x33". Using staples and wood glue, attach it to the back of your cabinet door frame. This will hold your mirror in place.
Using construction adhesive or mirror adhesive, glue your mirror on to the front of the cabinet door. Let dry completely before moving.
Attach the jewelry cabinet to the wall with grabber screws or lag bolts, through the 1x6's.
No reviews yet
Sign in to review this plan or share your build.
No reviews yet. Be the first to build this.