Industrial Bookshelf — board plan

What to buy, and which parts come off which board.

Buy 7 boards at 8 ft.

1 1/2" × 1 1/2" — 2x2

4 boards · 5.3 board feet (includes 15% for knots and defects) · 77% of the boards you buy used

Board 1 · 9 1/8" left over
69"8 1/4"8 1/4"
1. Legs — 69"
2. Bottom leg supports — 8 1/4"
3. Bottom leg supports — 8 1/4"
Board 2 · 25 7/8" left over
69"
1. Legs — 69"
Board 3 · 25 7/8" left over
69"
1. Legs — 69"
Board 4 · 25 7/8" left over
69"
1. Legs — 69"

3/4" × 11 1/4" — 1x12

2 boards · 9.6 board feet (includes 15% for knots and defects) · 76% of the boards you buy used

Board 1 · 7 5/8" left over
31"28"28"
1. Top — 31"
2. Shelves — 28"
3. Shelves — 28"
Board 2 · 38 3/4" left over
28"28"
1. Shelves — 28"
2. Shelves — 28"

1/4" × 16 1/2" — 1/4" plywood

1 board · 2.0 board feet (includes 15% for knots and defects) · 65% of the boards you buy used

Board 1 · 33 3/4" left over
30 1/2"30 1/2"
1. Back panels — 30 1/2"
2. Back panels — 30 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 1 1/2" — 2x2

Board 1 · 9 1/8" left over

Board 2 · 25 7/8" left over

Board 3 · 25 7/8" left over

Board 4 · 25 7/8" left over

3/4" × 11 1/4" — 1x12

Board 1 · 7 5/8" left over

Board 2 · 38 3/4" left over

1/4" × 16 1/2" — 1/4" plywood

Board 1 · 33 3/4" left over