Toy Ice Cream Cart — board plan

What to buy, and which parts come off which board.

Buy 9 boards at 8 ft.

1 1/2" × 1 1/2" — Pine, 2x2

1 board · 1.4 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

Board 1 · 14 3/4" left over
40"40"
1. Legs — 40"
2. Legs — 40"

1 1/4" × 1 1/4" — Wood dowel

1 board · 0.2 board feet (includes 15% for knots and defects) · 18% of the boards you buy used

Board 1 · 78 3/8" left over
16 1/2"
1. Umbrella pole — 16 1/2"

1" × 1" — Wood dowel

1 board · 0.1 board feet (includes 15% for knots and defects) · 14% of the boards you buy used

Board 1 · 82 7/8" left over
12"
1. Awning support dowel — 12"

3/4" × 7 1/4" — Pine, 1x8

2 boards · 4.6 board feet (includes 15% for knots and defects) · 57% of the boards you buy used

Board 1 · 2 3/8" left over
22 1/2"22 1/2"16"16"15"
1. Box sides — 22 1/2"
2. Box sides — 22 1/2"
3. Serving flaps — 16"
4. Serving flaps — 16"
5. Box ends — 15"
Board 2 · 79 7/8" left over
15"
1. Box ends — 15"

3/4" × 3 1/2" — Pine, 1x4

1 board · 0.8 board feet (includes 15% for knots and defects) · 43% of the boards you buy used

Board 1 · 55" left over
16 1/2"15"4"4"
1. Top piece — 16 1/2"
2. Wheel support, top — 15"
3. Wheel support, sides — 4"
4. Wheel support, sides — 4"

3/4" × 1 1/2" — Pine, 1x2

2 boards · 1.5 board feet (includes 15% for knots and defects) · 88% of the boards you buy used

Board 1 · 1 1/2" left over
30"30"18"15"
1. Box top trim — 30"
2. Box top trim — 30"
3. Box end trim — 18"
4. Serving flap trim — 15"
Board 2 · 21 3/8" left over
16 3/4"16 3/4"13 1/2"13"13"
1. Awning trim — 16 3/4"
2. Awning trim — 16 3/4"
3. Awning end trim — 13 1/2"
4. Cross braces — 13"
5. Cross braces —

1/4" × 22 1/2" — Plywood

1 board · 0.7 board feet (includes 15% for knots and defects) · 18% of the boards you buy used

Board 1 · 78 3/8" left over
16 1/2"
1. Box bottom — 16 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 1 1/2" — Pine, 2x2

Board 1 · 14 3/4" left over

1 1/4" × 1 1/4" — Wood dowel

Board 1 · 78 3/8" left over

1" × 1" — Wood dowel

Board 1 · 82 7/8" left over

3/4" × 7 1/4" — Pine, 1x8

Board 1 · 2 3/8" left over

Board 2 · 79 7/8" left over

3/4" × 3 1/2" — Pine, 1x4

Board 1 · 55" left over

3/4" × 1 1/2" — Pine, 1x2

Board 1 · 1 1/2" left over

Board 2 · 21 3/8" left over

1/4" × 22 1/2" — Plywood

Board 1 · 78 3/8" left over