Skip to content
Notch
← Back to the plan

Hidden Jewelry Cabinet — board plan

What to buy, and which parts come off which board.

Buy 7 boards at 8 ft.

3/4" × 14"

1 board · 1.5 board feet (includes 15% for knots and defects) · 20% of each board consumed

  1. Board 1 · 76 7/8" left over

    1. Sign — 18"

3/4" × 3"

1 board · 1.1 board feet (includes 15% for knots and defects) · 66% of each board consumed

  1. Board 1 · 32 1/2" left over

    1. Box sides — 17"
    2. Box sides — 17"
    3. Box top/bottom — 14"
    4. Box top/bottom — 14"

3/4" × 1"

2 boards · 0.9 board feet (includes 15% for knots and defects) · 81% of each board consumed

  1. Board 1 · 2 3/8" left over

    1. Box frame sides — 20"
    2. Box frame sides — 20"
    3. Sign frame sides — 18"
    4. Sign frame sides — 18"
    5. Box frame top/bottom — 16"

  2. Board 2 · 33 1/2" left over

    1. Box frame top/bottom — 16"
    2. Sign frame top/bottom — 16"
    3. Sign frame top/bottom — 16"
    4. Bracelet rack — 13"

1/4" × 14"

1 board · 0.5 board feet (includes 15% for knots and defects) · 20% of each board consumed

  1. Board 1 · 76 7/8" left over

    1. Box back — 18"

1/4" × 1"

1 board · 0.0 board feet (includes 15% for knots and defects) · 18% of each board consumed

  1. Board 1 · 78 3/4" left over

    1. Ring box front — 13"
    2. Ring box divider — 3"

3/16" × 3/16"

1 board · 0.0 board feet (includes 15% for knots and defects) · 45% of each board consumed

  1. Board 1 · 52 1/2" left over

    1. Pegs — 2"
    2. Pegs — 2"
    3. Pegs — 2"
    4. Pegs — 2"
    5. Pegs — 2"
    6. Pegs — 2"
    7. Pegs — 2"
    8. Pegs — 2"
    9. Pegs — 2"
    10. Pegs — 2"
    11. Pegs — 2"
    12. Pegs — 2"
    13. Pegs — 2"
    14. Pegs — 2"
    15. Pegs — 2"
    16. Pegs — 2"
    17. Pegs — 2"
    18. Pegs — 2"
    19. Pegs — 2"
    20. Pegs — 2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.