Skip to content

Browse▾

All plans Cutting Boards Furniture Storage & Shelving Outdoor Shop Projects Gifts & Small Projects

Learning About FAQ

Search plans

Search plans

Browse by category▾

All plans Cutting Boards Furniture Storage & Shelving Outdoor Shop Projects Gifts & Small Projects

Learning About FAQLog in Sign up

Browse

Cutting Boards
Furniture
Storage & Shelving
Outdoor
Shop Projects
Gifts & Small Projects

Site

All plans
Learning
About
FAQ

Notch — Built naturally. Made to last.

© 2026 Notch. Measure your own material and follow the safety guidance for your tools — a plan is a well-specified starting point, not a substitute for judgement at the saw.

Loading plan…

Build: Haley Simple Shelves · Notch

← Back to the plan

Storage & Shelving

Haley Simple Shelves

Step-by-step build — 2 steps. Also available as a print sheet.

1Attach the back to the sides
Tools
- Drill / Driver
- Pocket Hole Jig
Materials
- 1x4 board, 18-1/2" (your desired shelf length minus 5-1/2")
- 1x6 board, 12"
- Pocket-hole screws, countersunk screws, or finish nails
- Wood glue
Attach the back board to the two side pieces. If you're using a pocket-hole jig, also drill pocket holes facing upward on this assembly now, for attaching the top in the next step.
2Attach the top and hang the shelf
Tools
- Drill / Driver
- Level
Materials
- 1x8 board, 24" (or your desired shelf length)
- Pocket-hole screws, countersunk screws, or finish nails
- Wood glue
Attach the top to the sides and back. When you hang the shelf, screw directly through the back 1x4 into the studs in your wall, checking with a level as you go.