Hailey Storage Tower

Start by building a box out of the 1x12 sides and shelves. Because it's fully face-framed with a plywood back, you can build it with a nailer — just keep it square.

Add the face frame, starting with the longer 1x2 side trim, using 1-1/4" finish nails and glue and nailing into the fixed shelves for support. Then add the shelf trim.

Attach the 1/4" plywood to the back with glue, fastening to all the fixed shelves. The back squares and stiffens the tall tower.

Build the base from the ripped 2x4 legs, 2x2 spacers, and supports — if you didn't rip the legs to 3", make the 2x2 spacers 1" shorter. Add a bit of 1x3 crown up top to match the bed.

Build the door to fit its actual opening with a 1/8" gap all around — overlay doors are more forgiving than inset if you're unsure. Hang it, sand, and finish. Because it's tall, anchor the tower to the wall to prevent tipping.