Hailey Hutch for Twin and Full Beds — board plan

What to buy, and which parts come off which board.

Buy 10 boards at 8 ft.

3/4" × 11 1/4" — 1x12

4 boards · 21.2 board feet (includes 15% for knots and defects) · 83% of the boards you buy used

Board 1 · 3/4" left over
54 3/4"39 1/4"
1. Top and bottom (full) — 54 3/4"
2. Top and bottom (twin) — 39 1/4"
Board 2 · 3/4" left over
54 3/4"39 1/4"
1. Top and bottom (full) — 54 3/4"
2. Top and bottom (twin) — 39 1/4"
Board 3 · 10" left over
10 1/2"10 1/2"10 1/2"10 1/2"10 1/2"10 1/2"10 1/2"10 1/2"
1. Cubby dividers (twin) — 10 1/2"
2. Cubby dividers (twin) — 10 1/2"
3. Cubby dividers (twin) — 10 1/2"
4. Cubby dividers (twin) — 10 1/2"
5. Cubby dividers (twin) — 10 1/2"
6. Cubby dividers (full) — 10 1/2"
7. Cubby dividers (full) — 10 1/2"
8. Cubby dividers (full) — 10 1/2"
Board 4 · 52 1/2" left over
10 1/2"10 1/2"10 1/2"10 1/2"
1. Cubby dividers (full) — 10 1/2"
2. Cubby dividers (full) — 10 1/2"
3. Cubby dividers (full) — 10 1/2"
4. Cubby dividers (full) — 10 1/2"

3/4" × 2 1/2" — 1x3

2 boards · 1.6 board feet (includes 15% for knots and defects) · 58% of the boards you buy used

Board 1 · 40 1/8" left over
54 3/4"
1. Bottom face trim (twin) — 54 3/4"
Board 2 · 40 1/8" left over
54 3/4"
1. Bottom face trim (full) — 54 3/4"

3/4" × 1 1/2" — 1x2

3 boards · 1.9 board feet (includes 15% for knots and defects) · 73% of the boards you buy used

Board 1 · 3/4" left over
54 3/4"39 1/4"
1. Front top/bottom trim (full) — 54 3/4"
2. Front top/bottom trim (twin) — 39 1/4"
Board 2 · 3/4" left over
54 3/4"39 1/4"
1. Front top/bottom trim (full) — 54 3/4"
2. Front top/bottom trim (twin) — 39 1/4"
Board 3 · 75 1/4" left over
9 3/4"9 3/4"
1. Side trim — 9 3/4"
2. Side trim — 9 3/4"

1/4" × 12" — 1/4" plywood

1 board · 2.3 board feet (includes 15% for knots and defects) · 99% of the boards you buy used

Board 1 · 3/4" left over
54 3/4"39 1/4"
1. Plywood back (full) — 54 3/4"
2. Plywood back (twin) — 39 1/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 11 1/4" — 1x12

Board 1 · 3/4" left over

Board 2 · 3/4" left over

Board 3 · 10" left over

Board 4 · 52 1/2" left over

3/4" × 2 1/2" — 1x3

Board 1 · 40 1/8" left over

Board 2 · 40 1/8" left over

3/4" × 1 1/2" — 1x2

Board 1 · 3/4" left over

Board 2 · 3/4" left over

Board 3 · 75 1/4" left over

1/4" × 12" — 1/4" plywood

Board 1 · 3/4" left over