NotchLoading plan…
Loading plan…
Build this style sofa table or use it as a console table!
| Item | Qty |
|---|---|
| Wood, 1x6x8’ | 2 board |
| Wood, 1x8x6’ | 2 board |
| Wood, 2x6x6’ | 1 board |
| Dowel, 1/4” | 75 board |
| 1 1/4” pocket hole screws |
| 25 each |
| 3/4” pocket hole screws | 25 each |
| Variation of 80,120, 150 and 220 sandpaper | 1 each |
| Wood glue | 1 each |
| Stain of choice | 1 each |
| CA glue | 1 each |
| Z clips/Figure 8 fasteners | 1 each |
Overall cost: $$$$. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.
Cut wood to size. Set your pocket hole jig to 3/4” and pocket hole the top boards together using 3/4” wood glue and 3/4” screws.
Cut the legs using a track saw or table saw. Optional: Taper the legs at 5” from the bottom. Taper should be from 1.5” - 1”.
Cut the apron pieces to size. Using 1 1/4” pocket hole screws, first attach the short springs to the legs and then the long aprons. Make sure to recess the apron 1/4” to make room for the dowels.
Optional: roundover the legs using a router.
Cut all the dowels to size. Attach to the aprons using clear CA glue.
Sand the top and base then stain your choice of color.
Attach the top to the base using Z clips or figure 8 fasteners.
Optional: add hardware
No reviews yet
Sign in to review this plan or share your build.
No reviews yet. Be the first to build this.