Floor-Standing Upholstered Headboard — board plan

What to buy, and which parts come off which board.

Buy 5 boards at 8 ft.

1 1/2" × 3 1/2" — 2x4

4 boards · 14.4 board feet (includes 15% for knots and defects) · 91% of the boards you buy used

Board 1 · 12 3/4" left over
62"20"
1. Top and bottom rails — 62"
2. Mounting cleats — 20"
Board 2 · 12 3/4" left over
62"20"
1. Top and bottom rails — 62"
2. Mounting cleats — 20"
Board 3 · 4 3/4" left over
45"45"
1. Vertical studs — 45"
2. Vertical studs — 45"
Board 4 · 4 3/4" left over
45"45"
1. Vertical studs — 45"
2. Vertical studs — 45"

1/4" × 62" — 1/4" plywood

1 board · 5.6 board feet (includes 15% for knots and defects) · 48% of the boards you buy used

Board 1 · 49 7/8" left over
45"
1. Face panel — 45"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 3 1/2" — 2x4

Board 1 · 12 3/4" left over

Board 2 · 12 3/4" left over

Board 3 · 4 3/4" left over

Board 4 · 4 3/4" left over

1/4" × 62" — 1/4" plywood

Board 1 · 49 7/8" left over