Flat Wall Book Shelves

Cut the top profile into one side panel with a bandsaw or jigsaw. Use that finished side as a pattern to trace and cut the second, keeping both identical.

Build the box by fastening the shelves to the sides with 2" screws — measurements are to the bottoms of the shelves.

Fasten the back supports to the sides and shelves with 2" screws and glue. Confirm the bookshelf is square before this step.

Cut the arch shape into the front rail pieces with a jigsaw, then fasten in place the same way as the back supports. Confirm the shelf is square before fastening, since this step sets the final shape.

Miter and attach the base moulding footer. Fill any holes with wood filler, sand, and finish. Screw through the back supports into a real wall stud, or use a rated picture-hanging kit.