Fireplace TV Stand with Hidden Storage

Build the case from the top, sides, bottom, and dividers using the 1x12s. Pocket holes are convenient but not required — 2" trim screws or 1-1/4" brad nails and glue work just as well.

Build the top trim assembly (header) separately first, then attach the whole assembly to the case at once — this gets the top perfectly aligned in one step rather than fighting individual pieces in place.

Attach the assembled top piece to the bottom header assembly from the previous step, then attach the whole thing to the case as one unit.

Cut the three doors to fit their actual openings. Install them on the Euro-style non-mortise hinges.

Add the 1x2 trim around the door openings to complete the fireplace look — this trim also functions as the door handles, so position it where a hand naturally reaches.

Miter the crown moulding corners and attach around the top with 1-1/4" brad nails and glue. Do the same with the base moulding around the bottom.

Cut the back panel with a circular saw or table saw. Attach to all shelves, dividers, and the sides with glue and 3/4" brad nails.