Entryway Accessory Wall Cubby Organizer — board plan

What to buy, and which parts come off which board.

Buy 4 boards at 8 ft.

3/4" × 5 1/2" — Pine

3 boards · 7.6 board feet (includes 15% for knots and defects) · 81% of the boards you buy used

Board 1 · 14 3/4" left over
40"40"
1. Outer frame sides — 40"
2. Outer frame sides — 40"
Board 2 · 4 5/8" left over
30"30"30"
1. Outer frame top and bottom — 30"
2. Outer frame top and bottom — 30"
3. Vertical dividers — 30"
Board 3 · 34 3/4" left over
30"30"
1. Horizontal shelves — 30"
2. Horizontal shelves — 30"

1/4" × 30" — 1/4" plywood

1 board · 2.4 board feet (includes 15% for knots and defects) · 43% of the boards you buy used

Board 1 · 54 7/8" left over
40"
1. Back panel — 40"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 5 1/2" — Pine

Board 1 · 14 3/4" left over

Board 2 · 4 5/8" left over

Board 3 · 34 3/4" left over

1/4" × 30" — 1/4" plywood

Board 1 · 54 7/8" left over