DIY Wood Pumpkin Treat Holder — board plan

What to buy, and which parts come off which board.

Buy 3 boards at 8 ft.

3/4" × 5 1/2" — Cedar fence picket

2 boards · 3.8 board feet (includes 15% for knots and defects) · 62% of the boards you buy used

Board 1 · 5 3/8" left over
18"18"18"18"17"
1. Pumpkin face boards — 18"
2. Pumpkin face boards — 18"
3. Pumpkin face boards — 18"
4. Pumpkin face boards — 18"
5. Box front — 17"
Board 2 · 67 5/8" left over
16"5 1/2"5 1/2"
1. Box bottom — 16"
2. Box sides — 5 1/2"
3. Box sides — 5 1/2"

3/4" × 1 1/2" — Pine

1 board · 0.4 board feet (includes 15% for knots and defects) · 51% of the boards you buy used

Board 1 · 46 5/8" left over
20"20"8"
1. Pumpkin backer strips — 20"
2. Pumpkin backer strips — 20"
3. Stem backer — 8"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 5 1/2" — Cedar fence picket

Board 1 · 5 3/8" left over

Board 2 · 67 5/8" left over

3/4" × 1 1/2" — Pine

Board 1 · 46 5/8" left over