DIY Parsons Small Coffee Table

Attach the four 1x12 boards edge to edge to form the shelf/top panel.

Drill a 1-1/2" pocket hole on each end of the 2x2 supports. Attach them to the underside of the panel with 1-1/4" pocket hole screws.

Build the leg side frames independently, joined with 1-1/2" pocket hole screws and glue — one pocket hole per joint is enough if you're also gluing. Keep every pocket hole on the underside where it won't show.

Attach the assembled leg frames to the top panel: 1-1/4" pocket hole screws for the 3/4" holes, 2-1/2" pocket hole screws for the 1-1/2" holes.

Sand all surfaces smooth, then finish.