Build: DIY Modern Outdoor Chair

1Build Arms (2)

Cut the boards for the arms according to the image. Drill Kreg HD Pocket Holes and assemble the pieces as shown using Kreg HD Screws.

2Attach Back Supports

Attach the back supports to the two arms as shown in the diagram using Kreg HD Pocket Holes and Kreg HD Pocket Hole Screws.

3Attach the Seat Facing

Attach the seat facing to the arms as shown using Kreg HD Pocket Holes and Kreg HD Screws.

4Cut and Attach Side Rails

In order to get the two side rail supports (1 1/2" x 1 3/4" x 22 3/4") use a table saw to rip a 2x4 cut to 22 3/4" in half. Attach as shown using 2 1/2" outdoor wood screws.

5Attach Seat Supports

Attach the seat supports to the side rails using 2 1/2" wood screws as shown.