Display Cubbies Wall Shelf

Cut the vertical dividers to length. Mark and clearly track which side you measure from for all subsequent cuts, since board thickness varies slightly between pickets.

Cut notches into five of the seven horizontal shelf boards, marking the same reference side on every board to keep the grid square and even.

With the vertical dividers' marked end down, slide the shelves into place, marked ends consistently to the same side. Use a mallet to seat tight notches or sand as needed.

Mark the top and bottom shelf positions to match the notch-outs from step 2, matching the reference side. Nail with 1-1/4" finish nails and glue.

Cut and attach the two side boards. Add the optional back boards, cutting each to fit.

Cut the top down to final size with a jigsaw. Sand all surfaces and apply primer and paint, or stain and poly.