Demilune Table That Opens Into a Full Circle — board plan

What to buy, and which parts come off which board.

Buy 11 boards at 8 ft.

1 1/2" × 1 1/2" — Pine 2x2

2 boards · 2.1 board feet (includes 15% for knots and defects) · 63% of the boards you buy used

Board 1 · 5 3/8" left over
29 3/4"29 3/4"29 3/4"
1. Legs — 29 3/4"
2. Legs — 29 3/4"
3. Legs — 29 3/4"
Board 2 · 65 1/8" left over
29 3/4"
1. Legs — 29 3/4"

3/4" × 25 1/2" — 3/4" plywood

2 boards · 15.6 board feet (includes 15% for knots and defects) · 54% of the boards you buy used

Board 1 · 43 7/8" left over
51"
1. Top panels — 51"
Board 2 · 43 7/8" left over
51"
1. Top panels — 51"

3/4" × 21 1/8" — MDF or plywood

2 boards · 21.4 board feet (includes 15% for knots and defects) · 89% of the boards you buy used

Board 1 · 10 1/4" left over
42 1/4"42 1/4"
1. Front apron support blanks — 42 1/4"
2. Front apron support blanks — 42 1/4"
Board 2 · 10 1/4" left over
42 1/4"42 1/4"
1. Front apron support blanks — 42 1/4"
2. Front apron support blanks — 42 1/4"

3/4" × 4 1/4" — 3/4" plywood

1 board · 0.3 board feet (includes 15% for knots and defects) · 12% of the boards you buy used

Board 1 · 84 7/8" left over
10"
1. Leg shelf — 10"

3/4" × 3 1/2" — 3/4" plywood

2 boards · 2.6 board feet (includes 15% for knots and defects) · 65% of the boards you buy used

Board 1 · 2 1/2" left over
35"35"17"5"
1. Front aprons — 35"
2. Front aprons — 35"
3. Back aprons — 17"
4. Leg shelf supports — 5"
Board 2 · 64 1/4" left over
17"5"4 1/8"4 1/8"
1. Back aprons — 17"
2. Leg shelf supports — 5"
3. Fourth leg aprons — 4 1/8"
4. Fourth leg aprons — 4 1/8"

3/4" × 2 3/4" — 3/4" plywood

1 board · 0.6 board feet (includes 15% for knots and defects) · 41% of the boards you buy used

Board 1 · 56 1/4" left over
19 1/4"19 1/4"
1. Fourth leg slides — 19 1/4"
2. Fourth leg slides — 19 1/4"

3/4" × 2" — 3/4" plywood

1 board · 0.1 board feet (includes 15% for knots and defects) · 7% of the boards you buy used

Board 1 · 89 1/4" left over
2 3/4"2 3/4"
1. Fourth leg stops — 2 3/4"
2. Fourth leg stops — 2 3/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 1 1/2" — Pine 2x2

Board 1 · 5 3/8" left over

Board 2 · 65 1/8" left over

3/4" × 25 1/2" — 3/4" plywood

Board 1 · 43 7/8" left over

Board 2 · 43 7/8" left over

3/4" × 21 1/8" — MDF or plywood

Board 1 · 10 1/4" left over

Board 2 · 10 1/4" left over

3/4" × 4 1/4" — 3/4" plywood

Board 1 · 84 7/8" left over

3/4" × 3 1/2" — 3/4" plywood

Board 1 · 2 1/2" left over

Board 2 · 64 1/4" left over

3/4" × 2 3/4" — 3/4" plywood

Board 1 · 56 1/4" left over

3/4" × 2" — 3/4" plywood

Board 1 · 89 1/4" left over