Deep Console Table with Hutch — board plan

What to buy, and which parts come off which board.

Buy 9 boards at 8 ft.

3/4" × 23 1/2" — Plywood

1 board · 9.0 board feet (includes 15% for knots and defects) · 68% of the boards you buy used

Board 1 · 30 7/8" left over
64"
1. Tabletop — 64"

3/4" × 11 1/4" — Pine

2 boards · 10.8 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

Board 1 · 7 1/8" left over
65"11 1/4"11 1/4"
1. Hutch top — 65"
2. Hutch dividers — 11 1/4"
3. Hutch dividers — 11 1/4"
Board 2 · 21 5/8" left over
30 7/8"30 7/8"11 1/4"
1. Hutch sides — 30 7/8"
2. Hutch sides — 30 7/8"
3. Hutch dividers — 11 1/4"

3/4" × 2 1/2" — Pine

4 boards · 3.7 board feet (includes 15% for knots and defects) · 66% of the boards you buy used

Board 1 · 17 3/4" left over
59"18"
1. Aprons, long — 59"
2. Aprons, short — 18"
Board 2 · 17 3/4" left over
59"18"
1. Aprons, long — 59"
2. Aprons, short — 18"
Board 3 · 17 3/4" left over
59"18"
1. Aprons, long — 59"
2. Aprons, short — 18"
Board 4 · 76 7/8" left over
18"
1. Aprons, short —

3/4" × 1 1/2" — Pine

2 boards · 1.0 board feet (includes 15% for knots and defects) · 60% of the boards you buy used

Board 1 · 6 1/4" left over
65"23 1/2"
1. Tabletop back trim — 65"
2. Tabletop side trim — 23 1/2"
Board 2 · 71 3/8" left over
23 1/2"
1. Tabletop side trim — 23 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 23 1/2" — Plywood

Board 1 · 30 7/8" left over

3/4" × 11 1/4" — Pine

Board 1 · 7 1/8" left over

Board 2 · 21 5/8" left over

3/4" × 2 1/2" — Pine

Board 1 · 17 3/4" left over

Board 2 · 17 3/4" left over

Board 3 · 17 3/4" left over

Board 4 · 76 7/8" left over

3/4" × 1 1/2" — Pine

Board 1 · 6 1/4" left over

Board 2 · 71 3/8" left over