Console Table — board plan

What to buy, and which parts come off which board.

Buy 7 boards at 8 ft.

3/4" × 7"

1 board · 1.5 board feet (includes 15% for knots and defects) · 38% of the boards you buy used

Board 1 · 59 7/8" left over
35"
1. Bottom Shelf — 35"

3/4" × 5"

1 board · 2.5 board feet (includes 15% for knots and defects) · 89% of the boards you buy used

Board 1 · 10 3/4" left over
42"42"
1. Top Board — 42"
2. Top Board — 42"

3/4" × 3"

1 board · 1.4 board feet (includes 15% for knots and defects) · 83% of the boards you buy used

Board 1 · 16 1/2" left over
33"33"6"6"
1. Long Apron — 33"
2. Long Apron — 33"
3. Short Apron — 6"
4. Short Apron — 6"

3/4" × 1"

4 boards · 1.6 board feet (includes 15% for knots and defects) · 70% of the boards you buy used

Board 1 · 28 3/4" left over
33"33"
1. Leg Blank — 33"
2. Leg Blank — 33"
Board 2 · 28 3/4" left over
33"33"
1. Leg Blank — 33"
2. Leg Blank — 33"
Board 3 · 28 3/4" left over
33"33"
1. Leg Blank — 33"
2. Leg Blank — 33"
Board 4 · 28 3/4" left over
33"33"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 7"

Board 1 · 59 7/8" left over

3/4" × 5"

Board 1 · 10 3/4" left over

3/4" × 3"

Board 1 · 16 1/2" left over

3/4" × 1"

Board 1 · 28 3/4" left over

Board 2 · 28 3/4" left over

Board 3 · 28 3/4" left over

Board 4 · 28 3/4" left over