Console Table – Metric — board plan

What to buy, and which parts come off which board.

Buy 0 boards at 8 ft.

Some parts do not fit on a 8 ft board. Pick a longer board above, or plan to join them. They are listed with their groups below — they are not included in the board count.

19" × 184"

0 boards · 25183.3 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

Bottom Shelf at 902" — Longer than a 96″ board once the end trim is taken off.

19" × 140"

0 boards · 45332.7 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

Top Boards at 1067" — Longer than a 96″ board once the end trim is taken off.
Top Boards at 1067" — Longer than a 96″ board once the end trim is taken off.

19" × 90"

0 boards · 27421.7 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

Long Apron at 838" — Longer than a 96″ board once the end trim is taken off.
Long Apron at 838" — Longer than a 96″ board once the end trim is taken off.
Short Apron at 166" — Longer than a 96″ board once the end trim is taken off.
Short Apron at 166" — Longer than a 96″ board once the end trim is taken off.

19" × 38"

0 boards · 38655.1 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.
Leg Blank at 838" — Longer than a 96″ board once the end trim is taken off.

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.