Castle Loft Bed with Stairs and Slide — board plan

1 1/2" × 1 1/2" — Pine 2x2

2 boards · 2.8 board feet (includes 15% for knots and defects) · 82% of the boards you buy used

1. Board 1 · 17 3/8" left over

   77 1/2"
   1. Mattress support rails — 77 1/2"

2. Board 2 · 17 3/8" left over

   77 1/2"
   1. Mattress support rails — 77 1/2"

3/4" × 60" — Plywood, 3/4"

1 board · 24.8 board feet (includes 15% for knots and defects) · 74% of the boards you buy used

1. Board 1 · 25 1/4" left over

   18"11"10"10"10"10"
   1. Tower front, wide — 18"
   2. Tower front, narrow — 11"
   3. Tower sides — 10"
   4. Tower sides — 10"
   5. Tower sides — 10"
   6. Tower sides — 10"

3/4" × 48" — Plywood, 3/4"

4 boards · 82.1 board feet (includes 15% for knots and defects) · 76% of the boards you buy used

1. Board 1 · 9 7/8" left over

   56 1/2"26"2 1/4"
   1. Slide sides — 56 1/2"
   2. Stairs back — 26"
   3. Front right filler section — 2 1/4"

2. Board 2 · 21" left over

   56 1/2"17 1/4"
   1. Slide sides — 56 1/2"
   2. Slide back — 17 1/4"

3. Board 3 · 7 3/4" left over

   47"40"
   1. Front middle section — 47"
   2. Stairs sides — 40"

4. Board 4 · 54 7/8" left over

3/4" × 24 1/2" — Plywood, 3/4"

2 boards · 14.0 board feet (includes 15% for knots and defects) · 51% of the boards you buy used

1. Board 1 · 8 3/8" left over

   29 1/4"19 1/4"15"11 1/4"11 1/4"
   1. Top stair support — 29 1/4"
   2. Middle stair support — 19 1/4"
   3. Top stair tread — 15"
   4. Lower stair treads — 11 1/4"
   5. Lower stair treads — 11 1/4"

2. Board 2 · 85 5/8" left over

   9 1/4"
   1. Bottom stair support — 9 1/4"

3/4" × 16 1/2" — Plywood, 3/4"

1 board · 2.0 board feet (includes 15% for knots and defects) · 22% of the boards you buy used

1. Board 1 · 74 3/4" left over

   10"10"
   1. Tower seat and shelf — 10"
   2. Tower seat and shelf — 10"

3/4" × 15 3/4" — Plywood, 3/4"

2 boards · 11.2 board feet (includes 15% for knots and defects) · 63% of the boards you buy used

1. Board 1 · 17" left over

   57"13"7 5/8"
   1. Slide panel — 57"
   2. Slide platform — 13"
   3. Slide bottom support — 7 5/8"

2. Board 2 · 53 5/8" left over

   41 1/4"
   1. Slide platform support — 41 1/4"

3/4" × 9 1/2" — Plywood, 3/4"

1 board · 2.3 board feet (includes 15% for knots and defects) · 43% of the boards you buy used

1. Board 1 · 54 1/2" left over

   10"10"10"10"
   1. Tower shelves — 10"
   2. Tower shelves — 10"
   3. Tower shelves — 10"
   4. Tower shelves — 10"

3/4" × 3 1/2" — Pine 1x4

4 boards · 11.0 board feet (includes 15% for knots and defects) · 78% of the boards you buy used

• Railing, back at 115 3/4" — Longer than a 96″ board once the end trim is taken off.
• Railing, back at 115 3/4" — Longer than a 96″ board once the end trim is taken off.

1. Board 1 · 3/4" left over

   47"47"
   1. Railing, front center — 47"
   2. Railing, front center — 47"

2. Board 2 · 1 1/4" left over

   25"25"25"15 7/8"2 1/4"
   1. Railing, inside stairs — 25"
   2. Railing, inside stairs — 25"
   3. Railing, inside stairs — 25"
   4. Railing, outside stairs — 15 7/8"
   5. Railing, front right —

3/4" × 2 1/2" — Pine 1x3

8 boards · 9.6 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

1. Board 1 · 14 3/4" left over

   40"40"
   1. Mattress support slats — 40"
   2. Mattress support slats — 40"

2. Board 2 · 14 3/4" left over

   40"40"
   1. Mattress support slats — 40"
   2. Mattress support slats — 40"

3. Board 3 · 14 3/4" left over

   40"40"
   1. Mattress support slats — 40"
   2. Mattress support slats — 40"

4. Board 4 · 14 3/4" left over

3/4" × 1 1/2" — Pine 1x2

11 boards · 8.6 board feet (includes 15% for knots and defects) · 92% of the boards you buy used

1. Board 1 · 0" left over

   54"15 3/4"14 1/4"10 1/2"
   1. Slide rail supports — 54"
   2. Slide platform support, rear — 15 3/4"
   3. Upper stair step supports — 14 1/4"
   4. Lower stair step supports — 10 1/2"

2. Board 2 · 1/2" left over

   54"14 1/4"14 1/4"11 1/2"
   1. Slide rail supports — 54"
   2. Upper stair step supports — 14 1/4"
   3. Upper stair step supports — 14 1/4"
   4. Slide platform support sides —

1/8" × 6" — Plywood, 1/8"

1 board · 0.4 board feet (includes 15% for knots and defects) · 71% of the boards you buy used

1. Board 1 · 28 1/4" left over

   11"11"11"11"11"11"
   1. Tower parapet trim — 11"
   2. Tower parapet trim — 11"
   3. Tower parapet trim — 11"
   4. Tower parapet trim — 11"
   5. Tower parapet trim — 11"
   6. Tower parapet trim — 11"