Cabinet Console Table — board plan

What to buy, and which parts come off which board.

Buy 12 boards at 8 ft.

3/4" × 15 1/2" — Pine 1x3 frame

1 board · 5.6 board feet (includes 15% for knots and defects) · 64% of the boards you buy used

Board 1 · 34 1/2" left over
15"15"15"15"
1. Doors — 15"
2. Doors — 15"
3. Doors — 15"
4. Doors — 15"

3/4" × 11 1/4" — Pine 1x12

5 boards · 21.0 board feet (includes 15% for knots and defects) · 66% of the boards you buy used

Board 1 · 22 7/8" left over
72"
1. Top — 72"
Board 2 · 25 3/8" left over
69 1/2"
1. Bottom shelf — 69 1/2"
Board 3 · 24 1/4" left over
35 1/4"35 1/4"
1. Sides — 35 1/4"
2. Sides — 35 1/4"
Board 4 · 26" left over
34 3/8"34 3/8"
1. Interior shelves — 34 3/8"
2. Interior shelves — 34 3/8"
Board 5 · 63 3/8" left over

3/4" × 4 1/4" — Base moulding

1 board · 2.0 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

Board 1 · 14 1/2" left over
20"20"20"20"
1. Base moulding — 20"
2. Base moulding — 20"
3. Base moulding — 20"
4. Base moulding — 20"

3/4" × 2 1/2" — Pine 1x3

3 boards · 3.4 board feet (includes 15% for knots and defects) · 81% of the boards you buy used

Board 1 · 23 7/8" left over
71"
1. Face frame header — 71"
Board 2 · 1 1/2" left over
66"27 1/4"
1. Face frame footer — 66"
2. Face frame center divider trim — 27 1/4"
Board 3 · 29 1/4" left over
32 3/4"32 3/4"
1. Face frame sides — 32 3/4"
2. Face frame sides — 32 3/4"

3/4" × 1 1/2" — Pine 1x2

1 board · 0.6 board feet (includes 15% for knots and defects) · 76% of the boards you buy used

Board 1 · 22 7/8" left over
72"
1. Top front trim — 72"

1/4" × 36" — 1/4" plywood

1 board · 5.1 board feet (includes 15% for knots and defects) · 75% of the boards you buy used

Board 1 · 23 7/8" left over
71"
1. Back panel — 71"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 15 1/2" — Pine 1x3 frame

Board 1 · 34 1/2" left over

3/4" × 11 1/4" — Pine 1x12

Board 1 · 22 7/8" left over

Board 2 · 25 3/8" left over

Board 3 · 24 1/4" left over

Board 4 · 26" left over

Board 5 · 63 3/8" left over

3/4" × 4 1/4" — Base moulding

Board 1 · 14 1/2" left over

3/4" × 2 1/2" — Pine 1x3

Board 1 · 23 7/8" left over

Board 2 · 1 1/2" left over

Board 3 · 29 1/4" left over

3/4" × 1 1/2" — Pine 1x2

Board 1 · 22 7/8" left over

1/4" × 36" — 1/4" plywood

Board 1 · 23 7/8" left over