Brookstone Desk Hutch — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 11 1/4" — 1x12

2 boards · 12.3 board feet (includes 15% for knots and defects) · 97% of the boards you buy used

Board 1 · 1 1/4" left over
48"45 1/2"
1. Top — 48"
2. Shelf — 45 1/2"
Board 2 · 5" left over
32 3/4"32 3/4"12"12"
1. Sides — 32 3/4"
2. Sides — 32 3/4"
3. Dividers — 12"
4. Dividers — 12"

3/4" × 3 1/2" — 1x4

1 board · 1.9 board feet (includes 15% for knots and defects) · 96% of the boards you buy used

Board 1 · 3 3/4" left over
45 1/2"45 1/2"
1. Supports — 45 1/2"
2. Supports — 45 1/2"

3/4" × 1 1/2" — 1x2

2 boards · 1.0 board feet (includes 15% for knots and defects) · 60% of the boards you buy used

Board 1 · 14" left over
48"32 3/4"
1. Front top trim — 48"
2. Front side trim — 32 3/4"
Board 2 · 62 1/8" left over
32 3/4"
1. Front side trim — 32 3/4"

1/4" × 33 1/2" — wainscoting

1 board · 3.1 board feet (includes 15% for knots and defects) · 50% of the boards you buy used

Board 1 · 47 7/8" left over
47"
1. Back panel — 47"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 11 1/4" — 1x12

Board 1 · 1 1/4" left over

Board 2 · 5" left over

3/4" × 3 1/2" — 1x4

Board 1 · 3 3/4" left over

3/4" × 1 1/2" — 1x2

Board 1 · 14" left over

Board 2 · 62 1/8" left over

1/4" × 33 1/2" — wainscoting

Board 1 · 47 7/8" left over