Braden Shoe Shelf Entryway Bench — board plan

What to buy, and which parts come off which board.

Buy 5 boards at 8 ft.

3/4" × 23" — 3/4" plywood

2 boards · 16.8 board feet (includes 15% for knots and defects) · 65% of the boards you buy used

Board 1 · 7 1/8" left over
30 1/2"28 1/2"28 1/2"
1. Top — 30 1/2"
2. Shelves — 28 1/2"
3. Shelves — 28 1/2"
Board 2 · 60 1/4" left over
17 1/4"17 1/4"
1. Sides — 17 1/4"
2. Sides — 17 1/4"

3/4" × 3 1/2" — 1x4

1 board · 0.6 board feet (includes 15% for knots and defects) · 31% of the boards you buy used

Board 1 · 66 3/8" left over
28 1/2"
1. Toekick — 28 1/2"

3/4" × 1 1/2" — 1x2

1 board · 0.8 board feet (includes 15% for knots and defects) · 96% of the boards you buy used

Board 1 · 3 1/2" left over
30 1/2"27 1/2"16 1/2"16 1/2"
1. Top trim — 30 1/2"
2. Toekick trim — 27 1/2"
3. Side trim — 16 1/2"
4. Side trim — 16 1/2"

1/4" × 18" — 1/4" plywood

1 board · 1.1 board feet (includes 15% for knots and defects) · 32% of the boards you buy used

Board 1 · 64 7/8" left over
30"
1. Back — 30"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 23" — 3/4" plywood

Board 1 · 7 1/8" left over

Board 2 · 60 1/4" left over

3/4" × 3 1/2" — 1x4

Board 1 · 66 3/8" left over

3/4" × 1 1/2" — 1x2

Board 1 · 3 1/2" left over

1/4" × 18" — 1/4" plywood

Board 1 · 64 7/8" left over