Modern Industrial Adjustable Sawhorse Desk / Coffee Table — board plan

What to buy, and which parts come off which board.

Buy 5 boards at 8 ft.

1 1/2" × 5 1/2" — 2x6

1 board · 6.2 board feet (includes 15% for knots and defects) · 99% of the boards you buy used

Board 1 · 1/2" left over
23 1/2"23 1/2"23 1/2"23 1/2"
1. Top and bottom caps — 23 1/2"
2. Top and bottom caps — 23 1/2"
3. Top and bottom caps — 23 1/2"
4. Top and bottom caps — 23 1/2"

1 1/2" × 3 1/2" — 2x4

3 boards · 8.0 board feet (includes 15% for knots and defects) · 68% of the boards you buy used

Board 1 · 2 1/4" left over
16 5/8"16 5/8"16 5/8"16 5/8"16 5/8"8 7/8"
1. Legs — 16 5/8"
2. Legs — 16 5/8"
3. Legs — 16 5/8"
4. Legs — 16 5/8"
5. Legs — 16 5/8"
6. Upper leg spacers — 8 7/8"
Board 2 · 1 1/4" left over
16 5/8"16 5/8"16 5/8"8 7/8"

3/4" × 3 1/2" — 1x4

1 board · 2.0 board feet (includes 15% for knots and defects) · 99% of the boards you buy used

Board 1 · 1/2" left over
23 1/2"23 1/2"23 1/2"23 1/2"
1. Lower shelf slats — 23 1/2"
2. Lower shelf slats — 23 1/2"
3. Lower shelf slats — 23 1/2"
4. Lower shelf slats — 23 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 5 1/2" — 2x6

Board 1 · 1/2" left over

1 1/2" × 3 1/2" — 2x4

Board 1 · 2 1/4" left over

Board 2 · 1 1/4" left over

3/4" × 3 1/2" — 1x4

Board 1 · 1/2" left over

Board 3 · 89 1/2" left over