Simple Adirondack Side Table

Build the basic table frame from the 1x3s. The easiest joinery is a countersink bit with screws and glue; pocket-hole users can use 3/4" pocket holes and 1-1/4" pocket screws instead. Keep it square.

Attach the four legs to the outside of the frame. Keep them flush at the top and check that the table stands without a wobble before moving on.

Lay out the five top slats with even gaps between them so water drains through, and a slight overhang past the frame. Mark, predrill, and attach.

Enjoy it as-is — cedar will silver to grey outdoors and last fine — or apply an exterior finish if you want to hold the color. Ease any sharp edges first.